Thyristor regulators are used to control the force of an electromagnetic drive. Using a thyristor control, the transport speed of an electromagnetic vibrating chute or sieve can be infinitely controlled.
Adjustment of the desired value is done by means of a control signal of 0-10 volts, 0-20 mA or potentiometer of 100 kOhm. (potentiometer, range and rotary knob included)
Furthermore, the regulator is equipped with:
- minimum and maximum wish value adjustment
- Slow/fast startup adjustable
- 3000/6000 vibrations per minute
- Potential-free start/stop contact
Supplied in metal case, with main switch and rotary knob for setting the desired (output) value.
This control is available with a supply voltage of 230 Volt or 400 Volt.
Supply voltage : 230 Volt / 400 Volt ; 50/60 Hz.
Maximum output current : 12 A.
For full details, see DATASHEET (click here)
© 2023 www.vibratorytechnologyshop.com - Powered by Shoppagina.nl